|
|
|
|
| ITEM | CBM-135P | CBM-135QF | |||
| Headstock | Main motor (30min/Con.) | KW (HP) | AC45/37 (60/50) | AC30/22 (40/30) | |
| Spindle speed | min-1 (rpm) | 5~2500 | 3~1500 | ||
| Spindle taper | 7/24 Taper No.50 | 7/24 Taper No.50 | |||
| Spindle diameter | mm (in) | 135 (5.31) | 135 (5.31) | ||
| Milling spindle diameter | mm (in) | 215 (8.46) | 215 (8.46) | ||
| Quill diameter | mm (in) | 340 (13.4) | |||
| Max. spindle torque | Nm (kgm) [ft·ibs] | 3970 [2930] | 3490 (356) [2576] | ||
| Max. thrust spindle | N (kgf) [ft·ibf] | 29400 [6609] | 29400 (3000) [6600] | ||
| Travel | X axis (Column cross traverse) | mm (in) mm (in) |
Extendable every 1000 (40), Up to 6000 (236): Ball sctew feed Above 6000(236): Double pinion feed. |
Extendable every 1000 (40), Up to 6000 (236): Ball sctew feed Above 6000(236): Double pinion feed. |
|
| Y axis (Headstock vertical travel) | mm (in) | 2000 (79)·2500 (98)·3000 (118)·3500 (138) | 2000 (79)·2500 (98)·3000 (118)·3500 (138) | ||
| Z axis (Spindle travel) | mm (in) | 700 (27.6) | 700 (27.6) | ||
| W axis (Quill travel) | mm (in) | 350 (13.8) | |||
| Z axis+W axis | mm/min (in/min) | 1050 (41) | |||
| Feedrate | Rapid feed | X/Y axis | mm/min (in/min) | 6000 (236) | 6000 (236) |
| Z/W axis | mm/min (in/min) | 4000 (157) | 4000 (157) | ||
| Quill feed | 1~3000 (0.04~118) | ||||
| ITEM | CBM-110F | |||
| Headstock | Main motor (30min/Con.) | KW (HP) | AC 18/22 (24/29) | |
| Spindle speed | rpm/min | 5-2500 | ||
| Spindle taper | 7/24 Taper No.50 | |||
| Spindle diameter | mm (in) | 110 (4.33) | ||
| Max. spindle torque | Nm (kgm) [ft·ibs] | 2107 (215) | ||
| Max. thrust spindle | N (kgf) [ft·ibf] | 19600 (2000) | ||
| Travel | X axis (Column cross travel) | mm (in) |
2000-6000:Ball screw Above 6000:Gear driver |
|
| Y axis (Spindle vertical travel) | mm (in) | 2000(79)、2500(98)、3000(118) | ||
| W axis (Quill travel) | mm (in) | 600 (23.62) | ||
| Feedrate | Rapid feed | X/Y axis | mm/min (in/min) | 6000 (236) |
| Z/W axis | mm/min (in/min) | 4000 (157) | ||